Journal Home
Search for

Volume 35, Issue 8, Pages 1080-1085 (December 2009)


View previous. 4 of 30 View next.

Assessing the safety and compatibility of silver based wound dressings in a magnetic resonance environment

Zaid Chaudhryaemail address, Steffen Sammetbemail address, Rebecca Coffeyaemail address, Andrew Crockettaemail address, William T.C. Yuhbemail address, Sidney MilleraCorresponding Author Informationemail address

Accepted 17 February 2009.

Abstract 

Introduction

Silver dressings are an integral part of the management of burn patients. Package inserts assert a lack of compatibility and safety with magnetic resonance imaging (MRI) and recommend removal prior to any MRI procedure, although there is no clear evidence to support this recommendation. Dressing removal is associated with increased pain, anxiety, stress, and analgesia use. This study was to determine whether these products produce MRI image distortion or if the agitation of the silver particles generates enough heat which might produce further skin damage.

Methods

Hind limbs from euthanized pigs were used in a 7T MRI scanner with three standard silver wound dressings. Images were obtained with both dry and wet dressings. Temperature was assessed before and during MRI by probes inserted between the dressing and skin. Images were independently reviewed by a radiologist and MR physicist for distortion.

Results

None of the dressings exhibited significant temperature increases nor produced significant distortion that influenced imaging quality.

Conclusion

Our data suggests silver containing wound dressings do not cause a significant increase in dressing temperature or image distortion and thus their removal is not warranted for clinical MRI examinations.

a Ohio State University Burn Center, Department of Surgery and the OSU College of Medicine, 410 W. 10th Ave, N748 Doan, Columbus, OH, 43210 United States

b Ohio State University, Department of Radiology, 647 Means Hall, 1654 Upham Drive, Columbus, OH 43210, United States

Corresponding Author InformationCorresponding author. Tel.: +1 614 293 5710; fax: +1 614 293 3425.

PII: S0305-4179(09)00072-2

doi:10.1016/j.burns.2009.02.014


View previous. 4 of 30 View next.